Table of Contents
Advertisement
5 USAGE
Using the CMPJ+ Joystick
For this procedure, refer to FIGURE 2 on page 25.
1.
Make sure the wheelchair is on a level surface.
2.
Select a drive that has the Actuator Control Switch Mode icon
3.
Select the Actuator Control Switch Mode icon (Detail "A").
4.
Four of the following icons will display when Actuator Control Switch Mode is selected:
The location of the icons indicates the joystick direction or quadrant (Detail "B").
DESCRIPTION
ICON
Elevate Operations
Combined Power Leg Operations
Right Leg Operations
Left Leg Operations
No powered seating operation has been programmed for this quadrant.
No Icons
The three icons indicate up/down, up or down, respectively.
5.
Select the desired operation using the joystick or an equivalent switch.
Invacare® Van Seat
displayed.
24
Part No 1143195
Advertisement
Table of Contents
