5 USAGE
SYSTEM TYPE
Single Actuator (Elevate Only)
This procedure only applies to wheelchairs with Formula PTO Plus or Power Tilt Only seating systems.
Using the Powered Seating Switch
The powered seating switch can be used with all joysticks.
The powered seating switch will alternate functions (increase tilt angle, decrease tilt angle) after it has been released for a
minimum of three seconds.
1.
Make sure the wheelchair is on a level surface.
2.
Press the powered seating switch once to activate the actuator.
3.
Press the powered seating switch again (after at least 3 seconds) to activate the actuator in the opposite direction.
Using the MK6i SPJ+ w/ACC Joystick
For this procedure, refer to FIGURE 1 on page 23.
1.
Make sure the wheelchair is on a level surface.
2.
Press the mode button to switch from driving mode to tilt mode.
Invacare® Van Seat
JOYSTICK
MK6i SPJ+ w/PSS
MK6i SPJ+ w/ACC
CMPJ+
22
POWERED SEATING CONTROL
4 POLE MOTOR
SWITCH OPTION
Powered Seating Switch
THROUGH THE
JOYSTICK (TTJ)
No
Yes
Yes with SANODE
Part No 1143195