Verifying The Host Configuration; Backup Software Compatibility; Using Hp Library & Tape Tools - HP Surestore Tape Library Model 2/20 User Manual

Verifying the Host Configuration

Backup Software Compatibility

Using HP Library & Tape Tools
50 Verifying the Host Configuration
Once the library is connected to a host, the operating system must be
configured to recognize it (if it has not already been configured). The
procedures are different, depending on the host system:
Windows NT on page 51
Windows 2000 on page 51
Sun Solaris on page 52
HP-UX and MPE/iX
Consult your software documentation for more information on installing,
configuring, and operating your backup software.
For software compatibility information, visit http://www.hp.com/go/
automated or the Website for the backup software manufacturer:
HP Omniback II™ (http://www.openview.hp.com/products/omniback)
Veritas Backup Exec™ (http://www.veritas.com)
Veritas NetBackup™ (http://www.veritas.com)
Computer Associates ARCserve 2000™ (http://www.ca.com/arcserve)
Legato Networker™ (http://www.legato.com)
Tivoli Storage Manager™ (http://www.tivoli.com)
In addition to the following procedures, you can also check the installation with
HP Library & Tape Tools available from http://www.hp.com/support/
TapeTools. See HP Library & Tape Tools
With HP Library & Tape Tools installed on your host computer, you can do the
following and much more:
Identify all SCSI and Fibre Channel devices connected to your system
View detailed configuration, identification, inventory, and drive
information for the library
on page 52
on page 154 for more information.
Chapter 1