Identifying Product Components - HP Surestore Tape Library Model 2/20 User Manual

Identifying Product Components

Table 1
Callout
Component
Number
1 SCSI interface cable(s)
2 SCSI jumper cable(s)
3 Fibre Channel cable(s)
4 Label kit
5 Power cord(s)
6 SCSI terminator(s)
7 Fibre Channel GBIC
8 Data cartridge
9 Cleaning cartridge
10 User's Guide
12 Identifying Product Components
The components listed in
on the library configuration.
Note Visit http://www.hp.com/go/support for additional information
on the HP Library & Tape Tools diagnostic utility,
software
kits.
Accessories
Four-meter SCSI cable(s) with 68-pin high-density connectors.
68-pin VHD (Very High Density) cable that connects the
library controller or Fibre Channel controller to a drive.
Optical short-wave cable (16 meters) that connects the Fibre
Channel controller to the host, hub, or switch (for Fibre
Channel configurations).
Bar code labels for data and cleaning cartridges, and
reordering information.
Localized power cord(s).
68-pin high-density SCSI terminator (HVDS or LVDS) to
terminate the SCSI chain.
Connects the Fibre Channel cable to the host, hub, or switch
when necessary.
Data cartridge included for data backup.
Cleaning cartridge used when cleaning a drive.
Printed English user's guide describing installation,
operations, and troubleshooting information.
may be supplied with the library, depending
Table 1
compatibility information, accessories, and upgrade
Description
backup
Chapter 1