HP Surestore Tape Library Model 2/20 User Manual page 27

Figure 9
Chapter 1
WARNING Do not move the library without additional help or an
appropriately rated lift device. The 2/20 series library weighs
40 kg (87 lb). The 4/40 series library weighs 75 kg (165 lb).
The 6/60 series library weighs 104 kg (249 lb).
5. Tighten the screws on the top mounting rail to secure the library.
6. Install the stop bracket to ensure the library is secured inside the rack, and
will not come out past the service position (approximately 2/3 of the
library is out of the rack).
2/20 Series Library:
a. From the back of the library, unscrew the power supply thumbscrew
by hand or with a screwdriver.
b. Install the stop bracket by sliding the edge of the bracket under the
thumbscrew and threading the tab through the
c. Tighten the power supply thumbscrew to secure the bracket to the
library.
Installing the Stop Bracket for the 2/20 Series Library
Installing the 2/20, 4/40 & 6/60 Series Libraries into a Rack
latch stop.
25