HP Surestore Tape Library Model 2/20 User Manual page 215

Hp surestore tape library user's guide
Hide thumbs Also See for Surestore Tape Library Model 2/20:
Table of Contents

Advertisement

Table 46
Decimal
Hex
Error
Error
51
33H
52
34H
53
35H
54
36H
56
38H
57
39H
58
3AH
59
3BH
60
3CH
61
3DH
Appendix
Error Codes and Recovery Procedures
Description
Test not run, tapes not
in required locations.
Test not run, an
inventory check is
needed.
Failed test, refer to
previous error.
Test not run, some
elements are reserved.
Cannot run test with
tapes in current
locations.
Test not run, not
enough tapes in the
library.
Test not started, the
transport contains a
tape.
Failed to put tape into
magazine slot.
Failed to get tape
from magazine slot.
Failed inventory check
on a magazine slot.
Recovery Method
The library needs at least one tape and an empty
slot to perform this test.
Run the
Inventory Check
(see
Running Library Diagnostic Tests
page 156).
Update the backup software to show the
correct tape and slot configuration.
Note the error code qualifier to help determine
appropriate testing.
Check the backup software documentation to
disable the reserved condition.
The library needs at least one tape and an empty
slot to perform this test. For a drive test, it cannot
rewind the media.
Load one additional tape into the library.
Run the
test (see
Empty Transport
on page 156).
Diagnostic Tests
Note the error code qualifier to help determine
appropriate testing.
Note the error code qualifier to help determine
appropriate testing.
Note the error code qualifier to help determine
appropriate testing.
Check magazine back slot for debris or marks.
Clean if necessary.
test from the front panel
on
Running Library
Library Error Codes 213

Advertisement

Table of Contents
loading

Table of Contents