Choosing A Location - HP Surestore Tape Library Model 2/20 User Manual

Choosing a Location

Table 2
Room temperature
Power source
LAN connection
Library power
consumption
Air quality
Humidity
14 Choosing a Location
Choose a location that meets the criteria listed in
specifications, refer to
Location Criteria
10-35º C (50-95º F)
AC power voltage: 100-127 V or 200-240 V
Line frequency: 50-60 Hz
A dedicated circuit is required.
Caution: The AC power cord is the library's main AC disconnect device and
must be easily accessible at all times.
Locate the library near a LAN connection for connecting the RMC (remote
management card).
2/20 series Max: 200W
4/40 series Max: 375W
6/60 series Max: 560W
8/80 series Max: 725W
10/100 series Max: 1,200W
Minimal sources of particulate contamination. Avoid areas near frequently used
doors and walkways, stacks of supplies that collect dust, and smoke-filled rooms.
Excessive dust and debris can damage tapes and tape drives.
Caution:
20-80% RH
Technical Specifications
2. For additional
Table
on page 181.
Chapter 1