Replacing An Iopx.ethernet Fiber Or Cable - HP NetServer AA 6200 Administrator's Manual

Replacing an IOPx.Ethernet Fiber or Cable

The IOPx.Ethernet fiber or cable connects the IOP to the public Ethernet.
Caution: Before proceeding, make sure you are properly grounded using,
To replace an IOPx.Ethernet fiber or cable:
Step Action
1 Obtain a replacement Ethernet cable
from your service provider that meets
the specifications for your network.
2 Using Endurance Manager, make sure
that the other IOP is active and that it
has public network connectivity.
3 Remove the IOPx.Ethernet cable by
detaching it from the IOP and the public
Ethernet network.
4 Install the new Ethernet cable by
attaching it to the IOP and the public
Ethernet network.
5 Make sure that the Ethernet connection
that uses the replacement cable is on
standby (appears dark green).
9-14
for instance, a wrist strap with an attached alligator clip that is
connected to an appropriate ground.
Notes
Obtain the appropriate fiber or cable that meets
the specifications for your Ethernet adapter.
The IOPy.Ethernet is online or on standby.
Use Endurance Manager for this step.
HP Netserver AA Solution Administrator's Guide