HP NetServer AA 6200 Administrator's Manual page 227

Replacing an Interconnect Fiber Cable on an Online System
Use the following procedure to replace an interconnect fiber cable on an online system.
Caution: Before proceeding, make sure you are properly grounded using,
Step Action
1 Make sure a component at one end of
the fiber to be replaced is offline or
disabled.
2 Disconnect the existing fiber from the
Endurance system.
3 Connect the replacement fiber to the
Endurance system.
4 Enable the ESI path if it is faulted.
5 Make the components at each end of
the ESI path online or active.
Endurance Server Maintenance
for instance, a wrist strap with an attached alligator clip that is
connected to an appropriate ground.
Notes
Use Endurance Manager for this step.
9-11