Adding A Windows Service Pack; For The Ce Operating System; For An Iop - HP NetServer AA 6200 Administrator's Manual

Adding a Windows Service Pack

For the CE Operating System

To add a Windows Service Pack to the CE operating system:
Step Action
1 Schedule an appropriate time to reboot
the CE operating system.
2 Install Windows Service Pack software.
3 When prompted, reboot Windows.

For an IOP

Determine in advance if you want to install the Service Pack on both IOPs simultaneously. If
so, on both IOPs, perform step 1 and step 2 in the following table, and then reboot the entire
server.
If you do not want to install the Service Pack on both IOPs simultaneously, perform the entire
procedure in the table on one IOP, and then repeat the entire procedure on the other IOP.
To add a Windows Service Pack to an IOP:
Step Action
1 Install Windows Service Pack software.
2
When prompted, do
Windows.
3
Reboot the IOP as described on
.
9-3
9-26
not
reboot
page
Notes
Notes
If you reboot the IOPs while the CEs are
running, a mirror copy will occur.
HP Netserver AA Solution Administrator's Guide