Iopn.inputprovider Show Arbitration Timeout; Iopn.inputprovider Show Automatic Switchover - HP NetServer AA 6200 Administrator's Manual

IOPn.InputProvider Show Arbitration Timeout

This command displays the input arbitration setting for the Endurance server. When arbitration
is enabled, it allows input to be processed from only one tuple at a time (effectively blocking
input from the other tuple). At the end of each arbitration interval, input control is available to
switch to the first IOP where mouse movement or keyboard activity is detected. The arbitration
timeout is displayed as number of seconds.
Command IOPn.InputProvider Show Arbitration Timeout
Console Syntax MTCCONS IOPn.InputProvider Show Arbitration Timeout
n – the ID number of the IOP (1 or 2)
Variables
Results
See Also
IOPn.InputProvider Set Arbitration Timeout

IOPn.InputProvider Show Automatic Switchover

This command displays the setting of the automatic switchover parameter as either true
(enabled) or false (disabled). By default, automatic switchover is true.
Command IOPn.InputProvider Show Automatic Switchover
Console Syntax MTCCONS IOPn.InputProvider Show Automatic Switchover
n – the ID number of the IOP (1 or 2)
Variables
Results
Commands 5-53