Iopn.linkdriver Commands; Iopn.linkdriver Reset Port Counters; Iopn.linkdriver Show Parameter Values - HP NetServer AA 6200 Administrator's Manual

IOPn.LinkDriver Commands

The IOPn.LinkDriver commands control and return statistics the Endurance IOP Link (IL).
Table 5-23 lists the IOPn.LinkDriver commands.
Command

IOPn.LinkDriver Reset Port Counters

IOPn.LinkDriver Show Parameter Values

IOPn.LinkDriver Show Port Counters
IOPn.LinkDriver Show Port Information
IOPn.LinkDriver Reset Port Counters
This command resets the IL port counter statistics to zero on the specified IOP.
Command IOPn.LinkDriver Reset Port Counters
Console Syntax MTCCONS IOPn.LinkDriver Reset Port Counters
n – the ID number of the IOP (1 or 2)
Variables
The port counters for the IL device are set to zero.
Results
See Also
IOPn.LinkDriver Show Port Counters
IOPn.LinkDriver Show Parameter Values
This command returns the parameter values for the IL on the specified IOP.
Command IOPn.LinkDriver Show Parameter Values
Console Syntax MTCCONS IOPn.LinkDriver Show Parameter Values
n – the ID number of the IOP (1 or 2)
Variables
Commands
Table 5-23 IOPn.LinkDriver Commands
Page
5-59
5-59
5-61
5-63
5-59