Last Mirror Copy Status Window Contents - HP NetServer AA 4000 Administrator's Manual

Chapter 4
Table 4-6 Last Mirror Copy Status Window Contents
Option Description
Disk Identifies the SCSI disks associated with a mirror set (for example, Disk0).
Note: Endurance disk names, such as Disk0 and Disk1, do not necessarily match the
Status Contains one of the following:
IOP1 Identifies the direction of a mirror copy by:
IOP2
% Indicates the percentage of data that has been copied.
names of Windows NT similarly named disks, as seen when viewed with Disk
Administrator.
Done Mirror copy completed successfully.
Failed Mirror copy did not complete.
Note: A mirror copy may not complete for a variety of
Pending Mirror copy is waiting to start.
Note: A mirror copy target disk is offline while a
Started Mirror copy is in progress.
Unable A disk was located, but it cannot participate in a mirror
copy. For example, it may be faulted or it may have
been explicitly disabled.
Unknown State of the disk cannot be determined. For example, if
an IOP or one or more members of a mirror set are not
found, it is not possible to determine whether a mirror
copy is needed.
Current Mirrored disks contain identical information; no copy is
required.
S Indicates which IOP is the source of the mirror copy.
D Indicates which IOP is the destination of the mirror
copy.
Endurance Manager
reasons, such as an IOP may have been taken
down, a disk may have failed or been disabled, or
a disk may have encountered a bad spot.
mirror copy is pending. It transitions to online
as the mirror copy begins.
59