Field
Total Used Memory(bytes)
Used Rate
Displaying the operational status of the built-in fans
Use the display fan command to display the operating states of fans.
<HP>display fan
Fan
1 State: Normal
Fan
2 State: Normal
Fan
3 State: Normal
Table 9 Command output
Field
Fan
n
State
Displaying the operating state of a power supply
Use the display power command to display the operating state of a power supply.
<HP>display power
Power
1 State: Normal
Power
2 State: Absent
Table 10 Command output
Field
Power
n
State
Configuring the exception handling method
Configuration procedure
You can configure the device to handle system exceptions (such as system instruction faults, invalid
addresses, data overflow, null pointers, and division by zero operations) by using one of the following
methods:
Description
Used memory size (in bytes) of the device.
Memory usage of the device.
Description
Number of the fan.
Fan state:
•
Normal—The fan is operating correctly.
•
Absent—The fan is not in position.
•
Fault—The fan has failed.
Description
Number of the power supply.
Power supply state:
•
Normal—The power supply is operating correctly.
•
Absent—The power supply is not in position.
•
Fault—The power supply has failed.
4