HP NetServer AA 4000 Administrator's Manual page 190

Chapter 6
Committing When a Floppy Drive is Available
To commit configuration changes when a floppy drive is available on both IOPs:
Step Action
1 On the IOP where you made the changes:
a. Click Commit.
b. Insert a diskette in the floppy disk drive.
c. Click Save As, and save the
configuration onto the diskette
2 On the other IOP:
a. Insert the diskette (from Step 1) into the
floppy disk drive.
b. Using the Endurance Configuration
Utility:
- Click Open and open the configuration
file saved in Step 1.
- Click Commit.
3 If your server is operational:
a. Schedule an appropriate time to remove
your server from service and reboot the
.
IOPs
b. Issue an Endurance Manager Server
Shutdown command.
4 Reboot each IOP for the new configuration
to take effect.
174
Notes
.
The configuration information must be identical on
both IOPs for the server to operate properly.
Configuration Utility