HP NetServer AA 4000 Administrator's Manual page 232

Chapter 9
Step Action
4 Enable the ESI path if it is faulted.
5 Make the components at each end of the
ESI path online or active.
Replace an Interconnect Fiber Cable on an Offline System
Use the following procedure to replace an interconnect fiber cable on an offline system.
Caution: Before proceeding, make sure you are properly grounded using, for instance, a
wrist strap with an attached alligator clip that is connected to an appropriate
ground.
Step Action
1 Shut down and power off the system.
2 Disconnect the existing cable from the
system.
3 Connect the replacement cable to the
system.
4 Power on and boot the system.
5 Enable the ESI path if it is faulted.
6 Make the components at each end of the
ESI path online or active.
216
Notes
Use Endurance Manager for this step.
Notes
See Shutting Down the Server
Use the Endurance Manager for this step.
Maintenance
on page 214.