Iopn.monitor Disable Auto Start; Iopn.monitor Enable Auto Start - HP NetServer AA 4000 Administrator's Manual

Chapter 5

IOPn.Monitor Disable Auto Start

This command disables Auto Start for an IOP. When an IOP reboots, Auto Start allows the
specified IOP to automatically join the server configuration (after the time specified by the
initialization interval has elapsed), regardless of whether the other IOP is available. If Auto Start
is disabled, the IOP joins the configuration only if the other IOP is present or the other IOP is
faulted or disabled. Auto Start is also affected by the
command. By default, Auto Start is disabled.
Command IOPn.Monitor Disable Auto Start
Console Syntax MTCCONS IOPn.Monitor Disable Auto Start
n – the ID number of the IOP (1 or 2)
Variables
See Also

IOPn.Monitor Enable Auto Start

IOPn.Monitor Set Initialization Interval
IOPn.Monitor Show Auto Start
IOPn.Monitor Enable Auto Start
Warning: Changing the setting of Auto Start from its default (disabled) on
any IOP invalidates HP's Extended Data Warranty.
This command enables Auto Start for an IOP. When an IOP reboots, Auto Start allows the
specified IOP to automatically join the server configuration (after the time specified by the
initialization interval has elapsed), regardless of whether the other IOP is available. Auto Start
is also affected by the
By default, Auto Start is disabled.
Command IOPn.Monitor Enable Auto Start -disable_safeguard
Console Syntax
MTCCONS IOPn.Monitor Enable Auto Start -disable_safeguard
n – the ID number of the IOP (1 or 2)
Variables
See Also
IOPn.Monitor Disable Auto Start
IOPn.Monitor Set Initialization Interval
IOPn.Monitor Show Auto Start
144
IOPn.Monitor Set Initialization Interval
IOPn.Monitor Set Initialization Interval
command.
Commands