Replacing An Interconnect Fiber Cable; Interconnect Fiber Cable Chart - HP NetServer AA 4000 Administrator's Manual

Chapter 9

Replacing an Interconnect Fiber Cable

To replace an interconnect fiber cable:
Step Action
1 Obtain a replacement interconnect fiber cable from your service provider.
2 Using Table 9-1
Fiber cable between...
IOP1 to CE1
IOP1 to CE2
IOP2 to CE1
IOP2 to CE2
Replacing an Interconnect Fiber Cable on an Online System
Use the following procedure to replace an interconnect fiber cable on an online system.
Caution: Before proceeding, make sure you are properly grounded using, for instance, a
wrist strap with an attached alligator clip that is connected to an appropriate
ground.
Step Action
1 Make sure a component at one end of the
cable to be replaced is offline or disabled.
2 Disconnect the existing cable from the
system.
3 Connect the replacement cable to the
system.
as a guideline, identify the fiber cable to be replaced.
Table 9-1 Interconnect Fiber Cable Chart
Affects this HP NetServer
AA path
ESI11
ESI12
ESI21
ESI22
Affects these components
IOP1 and CE1
IOP1 and CE2
IOP2 and CE1
IOP2 and CE2
Notes
Maintenance
215