HP NetServer AA 4000 Administrator's Manual page 242
Hp netserver aa 6200 solution release 3.0 administrator’s guide
Hide thumbs
Also See for NetServer AA 4000:
- Manual (386 pages) ,
- Reference manual (142 pages) ,
- Installation manual (82 pages)
Table of Contents
Advertisement
Chapter 9
Step
Action
6
Reboot the new IOP into Operational
Endurance I/O Processor Mode.
7
Use Endurance Manager to ensure that:
• Any components affected by this
procedure are active or online. Reenable
any faulted or disabled components
(page
241).
• The IOP joins the server.
• The IL transitions to active.
• The IOPx.Ethernet transitions to standby
and all other cables transition to online.
• A mirror copy is either started or
pending for all mirrored devices.
• After all mirror copies are complete,
check the message log for any messages
that occurred after the IOP was replaced
and that begin with
226
Notes
The public Ethernets may require additional
considerations. Refer to the procedures on
information.
or
.
Maintenance
page 229
for
Advertisement
Table of Contents
