HP NetServer AA 4000 Administrator's Manual page 227

Chapter 9
To shut down an IOP:
Step Action
1 Follow the instructions in the procedure
Shutting Down the Server
2 Use Endurance Manager to ensure the
following:
• That the IOP you want to shut down is
not marked as the source of a mirror
copy.
• That the other IOP is active.
• That the other IOP has public network
connectivity (IOPx.Ethernet cable is
online).
3 From Endurance Manager, issue the
command IOPx Disable.
4 From the local IOP:
• Make sure that the keyboard and mouse
are controlling the IOP's operating
system.
• Issue a Windows NT Shutdown without
Restart.
5 When prompted, power off the IOP.
Notes
Do this only if you are willing to remove the server
on page 214. from service. If you do not want to remove the
server from service, continue with the next step.
If possible, perform any necessary backups for non-
mirrored devices on the IOP that you want to shut
down.
If necessary, enter the hotkey sequence to switch
control to the IOP's operating system.
Do this only when prompted.
Maintenance
211