Iopn.monitor Set Initialization Interval - HP NetServer AA 4000 Administrator's Manual

Chapter 5

IOPn.Monitor Set Initialization Interval

This command configures the interval that an IOP waits to initialize with another IOP before
responding to the CEs. The initialization interval is only valid if Auto Start is enabled. (Refer to
the IOPn.Monitor Enable Auto Start
When the initialization interval expires:
• If Auto Start is true (enabled), the specified IOP does not wait for the other IOP, and it
continues processing software.
• If Auto Start is false (disabled) and the other IOP is not faulted or disabled, the specified
IOP waits indefinitely to initialize with the other IOP.
By default, Auto Start is disabled, and the initialization interval is 120 seconds.
Command IOPn.Monitor Set Initialization Interval x
Console Syntax MTCCONS IOPn.Monitor Set Initialization Interval x
x – an integer that indicates the number of seconds to which the initialization
Variables
interval will be set.
If the timer expires, check the Windows NT Event Viewer on the CE for a
Results
message that indicates that the IOP is unavailable for initialization.
See Also
IOPn.Monitor Disable Auto Start
IOPn.Monitor Enable Auto Start
IOPn.Monitor Show Auto Start
IOPn.Monitor Show Initialization Interval
IOPn.Monitor Show Parameters
command for information.)
Commands
145