Table of Contents
Advertisement
Editing Synchronization Link Settings
You can edit the settings for a synchronization link.
Note: When you edit the settings for a synchronization link, the link's state
is changed to Unvalidated. You must enable the link before you can run
synchronization tasks on it. For more information on enabling links, see
"Enabling and Disabling Synchronization Links" on page 102.
To edit synchronization link settings:
1
In the Links list, select the link and click the Edit button. The link details are
made available for editing.
Note:
can enable the link. For more information on enabling links, see "Enabling
and Disabling Synchronization Links" on page 102.
2
Edit the configuration settings. A red asterisk next to the link's icon
the Links list indicates unsaved changes in that link.
Note:
For more information on configuration settings, see Chapter 3, "Creating
Synchronization Links."
3
To undo all changes, click the Discard Changes button.
4
To save the new configuration settings, click the Save button. Click Yes to
confirm. To run the integrity check, click Yes.
When editing link settings, you must save the new settings before you
You can edit more than one link simultaneously.
Chapter 4 • Working with Quality Center Synchronizer
in
99
Advertisement
Table of Contents
