Reset Qos Car Name - HP 6125G Command Reference Manual

Acl and qos command reference
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

Parameters
car-name: Name of the aggregate CAR action, a string of 1 to 31 characters.
cir committed-information-rate: Specifies the committed information rate (CIR) in kbps. The
committed-information-rate argument ranges from 8 to 32000000 and must be a multiple of 8.
cbs committed-burst-size: Specifies the committed burst size (CBS) in bytes.
If you do not specify the cbs keyword, the CBS is 62.5 × committed-information-rate by default, and
must be in the range of 512 to 16000000.
If you specify the cbs keyword, the CBS ranges from 512 to 16000000.
ebs excess-burst-size: Specifies the excess burst size (EBS) in bytes. The excess-burst-size argument ranges
from 0 to 16000000 and defaults to 512.
pir peak-information-rate: Specifies the peak information rate (PIR) in kbps. The peak-information-rate
argument ranges from 8 to 32000000 and must be a multiple of 8.
green action: Action to take on packets that conform to CIR. The default action is pass.
yellow action: Action to take on packets that conform to PIR but do not conform to CIR. The default action
is pass.
red action: Action to take on packets that conforms to neither CIR nor PIR. The default action is discard.
action: Action to take on packets, which can be:
discard: Drops the packet.
pass: Permits the packet to pass through.
remark-dot1p-pass new-cos: Sets the 802.1p priority value of the 802.1p packet to new-cos and
permits the packet to pass through. The new-cos argument is in the range of 0 to 7.
remark-dscp-pass new-dscp: Sets the DSCP value of the packet to new-dscp and permits the packet
to pass through. The new-dscp argument is in the range of 0 to 63 or a keyword in
Description
Use qos car aggregative to configure an aggregate CAR action.
Use undo qos car to remove an aggregate CAR action.
An aggregate CAR action does not take effect until it is referenced in a policy.
Examples
# Configure the aggregate CAR action aggcar-1, where CIR is 256, CBS is 4096, and red packets are
dropped.
<Sysname> system-view
[Sysname] qos car aggcar-1 aggregative cir 256 cbs 4096 red discard

reset qos car name

Syntax
reset qos car name [ car-name ]
View
User view
Default level
2: System level
92
Table
17.

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents