Qos Lr - HP 6125G Command Reference Manual

qos lr

Syntax
qos lr { inbound | outbound } cir committed-information-rate [ cbs committed-burst-size ]
undo qos lr { inbound | outbound }
View
Interface view
Default level
2: System level
Parameters
inbound: Limits the rate of incoming packets on the interface.
outbound: Limits the rate of outgoing packets on the interface.
cir committed-information-rate: Specifies the committed information rate (CIR) in kbps, which specifies the
average traffic rate. The CIR must be a multiple of 8 and ranges from 8 to 1000000 for a GE port and
8 to 10000000 for a 10-GE port.
cbs committed-burst-size: Specifies the committed burst size (CBS) in bytes.
If you do not specify the cbs keyword, the CBS is 62.5 × committed-information-rate by default and
•
must be a multiple of 512. If 62.5 × committed-information-rate is not a multiple of 512, the closest
higher multiple of 512 applies. The CBS cannot exceed 16000000.
If you specify the cbs keyword, the CBS ranges from 512 to 16000000 and must be a multiple of
•
512.
Description
Use qos lr to limit the rate of incoming packets or outgoing packets on the port.
Use undo qos lr to remove the rate limit.
Examples
# Limit the rate of outgoing packets on GigabitEthernet 1/0/1, with CIR 640 kbps.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos lr outbound cir 640
73