Congestion avoidance configuration
commands
display qos wred interface
Syntax
display qos wred interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface-type interface-number: Specifies a port by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display qos wred interface to display the WRED configuration of an interface.
If no interface is specified, this command displays the WRED configuration of all the interfaces.
Examples
# Display the WRED configuration of GigabitEthernet 1/0/1.
<Sysname> display qos wred interface GigabitEthernet 1/0/1
Interface: GigabitEthernet1/0/1
Current WRED configuration:
Applied WRED table name: queue-table1
display qos wred table
Syntax
display qos wred table [ table-name ] [ | { begin | exclude | include } regular-expression ]
View
Any view
85