Display Time-Range - HP 6125G Command Reference Manual

Table 4 Command output
Field
Interface
In-bound Policy
Out-bound Policy
acl 2001, Successful
acl6 2500, Fail

display time-range

Syntax
display time-range { time-range-name | all } [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
time-range-name: Specifies a time range name, a case-insensitive string of 1 to 32 characters. It must
start with an English letter.
all: Displays the configuration and status of all existing time ranges.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display time-range to display the configuration and status of the specified time range or all time
ranges.
Examples
# Display the configuration and status of time range t4.
<Sysname> display time-range t4
Current time is 17:12:34 4/13/2010 Tuesday
Time-range : t4 ( Inactive )
10:00 to 12:00 Mon
14:00 to 16:00 Wed
from 00:00 1/1/2010 to 23:59 1/31/2010
from 00:00 6/1/2010 to 23:59 6/30/2010
Description
Interface to which the ACL applies.
ACL used for filtering incoming traffic on the interface.
ACL used for filtering outgoing traffic on the interface.
IPv4 ACL 2001 has been applied to the interface.
The device has failed to apply IPv6 ACL 2500 to the interface.
12