HP 6125G Command Reference Manual page 16

View
Any view
Default level
1: Monitor level
Parameters
all: Specifies all interfaces.
interface interface-type interface-number: Specifies an interface by its type and number. VLAN interfaces
are not supported.
inbound: Specifies the inbound direction.
outbound: Specifies the outbound direction.
interface vlan-interface vlan-interface-number: Specifies a VLAN interface by its number.
slot slot-number: Specifies an IRF member switch. The slot-number argument is the ID of the IRF member
switch. Available values for the slot-number argument are member IDs already assigned in the IRF fabric.
If no IRF member switch is specified, the command displays application status of incoming and outgoing
packet filtering ACLs for VLAN interfaces of the master.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display packet-filter to display whether an ACL has been successfully applied to an interface for
packet filtering.
The ACL application status may be different on the master and on an IRF member switch because
•
of ACL resource insufficiency. You can specify the slot number in the display packet-filter command
to check the ACL application status on the member switch.
If you specify neither the inbound keyword nor the outbound keyword, the command displays the
•
application status of both incoming and outgoing packet filtering ACLs.
Examples
# Display the application status of incoming and outgoing packet filtering ACLs for interface
GigabitEthernet 1/0/1.
<Sysname> display packet-filter interface gigabitethernet 1/0/1
Interface: GigabitEthernet1/0/1
In-bound Policy:
acl 2001, Successful
Out-bound Policy:
acl6 2500, Fail
11