Qos Gts - HP 6125G Command Reference Manual

Field
CIR
CBS

qos gts

Syntax
qos gts queue queue-number cir committed-information-rate [ cbs committed-burst-size ]
undo qos gts queue queue-number
View
Interface view
Default level
2: System level
Parameters
queue queue-number: Shapes the packets in the specified queue. The queue-number argument ranges
from 0 to 7.
cir committed-information-rate: Specifies the committed information rate (CIR) in kbps, which specifies the
average traffic rate. The CIR must be a multiple of 8 and ranges from 8 to 1000000 for a GE port and
8 to 10000000 for a 10-GE port.
cbs committed-burst-size: Specifies the committed burst size (CBS) in bytes.
• If you do not specify the cbs keyword, the CBS is 62.5 × committed-information-rate by default and
must be a multiple of 512. If 62.5 × committed-information-rate is not a multiple of 512, the closest
higher multiple of 512 applies.
If you specify the cbs keyword, the CBS ranges from 512 to 16777216 and must be a multiple of 512.
•
Description
Use qos gts to set GTS parameters for the traffic of the specified queue on the interface.
Use undo qos gts to remove GTS parameters for the traffic of the specified queue on the interface.
By default, no GTS parameters are configured on a port.
Examples
# Configure GTS on interface GigabitEthernet 1/0/1 to limit the traffic rate to 640 kbps for queue 2.
<Sysname> system-view
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos gts queue 2 cir 640
Description
Committed information rate (CIR) in kbps
Committed burst size in bytes, which specifies the
depth of the token bucket for holding bursty traffic
71