Qos Bandwidth Queue; Qos Wfq - HP 6125G Command Reference Manual

qos bandwidth queue

Syntax
qos bandwidth queue queue-id min bandwidth-value
undo qos bandwidth queue queue-id [ min bandwidth-value ]
View
Interface view
Default level
2: System level
Parameters
queue-id: Queue ID, ranging from 0 to 7.
min bandwidth-value: Sets the minimum guaranteed bandwidth (in kbps) for a queue when the port is
congested. This argument ranges from 8 to 1000000 for a GE port and 8 to 10000000 for a 10-GE
port.
Description
Use qos bandwidth queue to set the minimum guaranteed bandwidth for a specified queue on the port.
Use undo qos bandwidth queue to cancel the configuration.
By default, the minimum guaranteed bandwidth is 64 kbps for a queue.
Configure minimum guaranteed bandwidth only for queues of WFQ-enabled ports.
Examples
# Set the minimum guaranteed bandwidth to 100 kbps for queue 0 on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos wfq
[Sysname-GigabitEthernet1/0/1] qos bandwidth queue 0 min 100

qos wfq

Syntax
qos wfq [ byte-count | weight ]
undo qos wfq
View
Interface view
Default level
2: System level
Parameters
byte-count: Enables byte-count WFQ, which allocates bandwidth to queues in terms of bytes.
weight: Enables packet-based WFQ, which allocates bandwidth to queues in terms of packets.
81