HP 6125G Command Reference Manual page 12

exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display acl to display configuration and match statistics for the specified or all IPv4 ACLs.
This command displays ACL rules in config or depth-first order, whichever is configured.
Examples
# Display the configuration and match statistics for all IPv4 ACLs.
<Sysname> display acl all
Basic ACL
Statistics is enabled
ACL's step is 5
rule 0 permit
rule 5 permit source 1.1.1.1 0 (5 times matched)
rule 10 permit vpn-instance mk
Basic ACL
ACL's step is 5
rule 10 permit source 1.1.1.1 0
rule 10 comment This rule is used in rd.
rule 5 permit source 2.2.2.2 0
rule 0 permit
Table 1 Command output
Field
Basic ACL 2000
named flow
3 rules
match-order is auto
Statistics is enabled
ACL's step is 5
rule 0 permit
5 times matched
rule 10 comment This rule is used in rd.
2000, named flow, 3 rules,
2001, named -none-, 3 rules, match-order is auto,
Description
Category and number of the ACL. The following field
information is about IPv4 basic ACL 2000.
The name of the ACL is flow. "-none-" means the ACL is not
named.
The ACL contains three rules.
The match order for the ACL is auto, which sorts ACL rules in
depth-first order. This field is not present when the match order
is config.
The rule match counting is enabled for this ACL.
The rule numbering step is 5.
Content of rule 0.
There have been five matches for the rule. If the counting
keyword is configured for the rule or the hardware-count
enable command is enabled for the ACL, the statistic counts
both rule matches performed in both software and hardware.
Otherwise, the statistics counts only rule matches performed in
software.
The description of ACL rule 10 is "This rule is used in rd."
7