Display Acl Resource - HP 6125G Command Reference Manual

rule 10 permit source1::/64
rule 10 comment This rule is used in rd.
rule 5 permit source 2::/64
rule 0 permit
Table 2 Command output
Field
Basic IPv6 ACL 2000
named flow
2 rules
match-order is auto
Statistics is enabled
ACL's step is 5
rule 0 permit
5 times matched
rule 10 comment This rule is used in rd.

display acl resource

Syntax
display acl resource [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
slot slot-number: Displays the usage of ACL rules on an IRF member switch. The slot-number argument
represents the ID of the IRF member switch. Available values for the slot-number argument are member
IDs already assigned in the IRF fabric. If no IRF member switch is specified, the command displays the
usage of ACL rules on all member switches.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
Description
Category and number of the ACL. The following field
information is about this IPv6 basic ACL 2000.
The name of the ACL is flow. "-none-" means the ACL is not
named.
The ACL contains two rules.
The match order for the ACL is auto, which sorts ACL rules in
depth-first order. This field is not present when the match order
is config.
The rule match counting is enabled for this ACL.
The rule numbering step is 5.
Content of rule 0.
There have been five matches for the rule. If the counting
keyword is configured for the rule or the hardware-count
enable command is enabled for the ACL, the statistic counts
both rule matches performed in both software and hardware.
Otherwise, the statistics counts only rule matches performed in
software.
The description of ACL rule 10 is "This rule is used in rd."
9