HP 6125G Command Reference Manual page 43

Acl and qos command reference
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

Keyword and argument combination
service-dot1p 8021p-list
ip-precedence ip-precedence-list
protocol protocol-name
qos-local-id local-id-value
source-mac mac-address
customer-vlan-id { vlan-id-list | vlan-id1 to vlan-id2 }
service-vlan-id { vlan-id-list | vlan-id1 to vlan-id2 }
NOTE:
If a class that uses the AND operator has multiple if-match acl, if-match acl ipv6, if-match
customer-vlan-id or if-match service-vlan-id clauses, a packet that matches any of the clauses matches
the class.
To successfully execute the traffic behavior associated with a traffic class that uses the AND operator,
define only one if-match clause for any of the following match criteria and input only one value for any
of the following list arguments, for example, the 8021p-list argument:
customer-dot1p 8021p-list
destination-mac mac-address
dscp dscp-list
ip-precedence ip-precedence-list
service-dot1p 8021p-list
source-mac mac-address
To create multiple if-match clauses for these match criteria or specify multiple values for the list arguments,
configure the operator of the class as OR and execute the if-match command multiple times.
Description
Use if-match to define a match criterion.
Description
Matches the 802.1p priority of the service provider
network.
The 8021p-list argument is a list of up to eight 802.1p
priority values. An 802.1p priority ranges from 0 to 7.
Matches IP precedence.
The ip-precedence-list argument is a list of up to eight
IP precedence values. An IP precedence ranges from
0 to 7.
Matches a protocol.
The protocol-name argument can be IP or IPv6.
Matches a local QoS ID, which ranges from 1 to
4095.
The local QoS ID ranges from 1 to 3999 on the HP
Blade 6125 switches.
Matches a source MAC address.
Matches the VLAN IDs of customer networks.
The vlan-id-list argument is a list of up to eight VLAN
IDs. The vlan-id1 to vlan-id2 specifies a VLAN ID
range, where the vlan-id1 must be smaller than the
vlan-id2. A VLAN ID ranges from 1 to 4094.
Matches the VLAN IDs of ISP networks.
The vlan-id-list is a list of up to eight VLAN IDs. The
vlan-id1 to vlan-id2 specifies a VLAN ID range, where
the vlan-id1 must be smaller than the vlan-id2. A VLAN
ID ranges from 1 to 4094.
38

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents