Ext-Community-Type; Filter-Policy Export - HP 6125G Command Reference Manual

ext-community-type

Syntax
ext-community-type { domain-id type-code1 | router-id type-code2 | route-type type-code3 }
undo ext-community-type { domain-id | router-id | route-type }
View
OSPF view
Default level
2: System level
Parameters
domain-id type-code1: Specifies the type code for the OSPF extended community attribute of Domain ID.
Valid values are 0x0005, 0x0105, 0x0205, and 0x8005.
router-id type-code2: Specifies the type code for the OSPF extended community attribute of Router ID.
Valid values are 0x0107 and 0x8001.
route-type type-code3: Specifies the type code for the OSPF extended community attribute of Route Type.
Valid values are 0x0306 and 0x8000.
Description
Use ext-community-type to configure the type code of an OSPF extended community attribute.
Use undo ext-community-type to restore the default.
By default, the type codes for the OSPF extended community attributes of Domain ID, Router ID, and
Route Type are 0x0005, 0x0107, and 0x0306 respectively.
Examples
# Configure the type codes of OSPF extended community attributes Domain ID, Router ID, and Route
Type as 0x8005, 0x8001, and 0x8000 respectively for OSPF process 100.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] ext-communityroute-type domain-id 8005
[Sysname-ospf-100] ext-communityroute-type router-id 8001
[Sysname-ospf-100] ext-communityroute-type route-type 8000

filter-policy export

Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } export [ direct | ospf process-id | rip process-id |
static ]
undo filter-policy export [ direct | ospf process-id | rip process-id | static ]
View
BGP-VPN instance view
Default level
2: System level
379