Peer Ebgp-Max-Hop (Bgp/Bgp-Vpn Instance View) - HP 6125G Command Reference Manual

View
BGP view, BGP-VPN instance view
Default level
2: System level
Parameters
group-name: Specifies the name of a peer group, a string of 1 to 47 characters.
ip-address: Specifies the IP address of a peer.
dscp-value: Sets the DSCP value for BGP packets.
Description
Use peer dscp to set the DSCP value for the BGP packets sent to the specified peer or peer group.
Use undo peer dscp to remove the configuration.
By default, the DSCP value in BGP packets is 48.
The peer or peer group you specified must have been created.
Examples
# In BGP view, set the DSCP value for the BGP packets sent to peer group test to 63.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test dscp 63
# In BGP-VPN instance view, set the DSCP value for the BGP packets sent to peer group test to 63. (The
VPN has been created.)
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] peer test dscp 63

peer ebgp-max-hop (BGP/BGP-VPN instance view)

Syntax
peer { group-name | ip-address } ebgp-max-hop [ hop-count ]
undo peer { group-name | ip-address } ebgp-max-hop
View
BGP view, BGP-VPN instance view
Default level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
hop-count: Maximum hop count, in the range of 1 to 255. The default is 64.
180