Apply Tag; Continue - HP 6125G Command Reference Manual

Examples
# Configure node 10 in permit mode of routing policy policy1: Set a preferred value of 66 for BGP
routing information matching AS path list 1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match as-path 1
[Sysname-route-policy] apply preferred-value 66

apply tag

Syntax
apply tag value
undo apply tag
View
Routing policy view
Default level
2: System level
Parameters
value: Tag value, in the range of 0 to 4294967295.
Description
Use apply tag to set a specified tag value for RIP or OSPF routing information.
Use undo apply tag to remove the clause configuration.
No routing tag is set for RIP or OSPF routing information by default.
Examples
# Configure node 10 in permit mode of routing policy policy1: set a tag of 100 for OSPF external routes.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match route-type external-type1
[Sysname-route-policy] apply tag 100

continue

Syntax
continue [ node-number ]
undo continue
View
Routing policy view
Default level
2: System level
Parameters
node-number: Routing policy node number, in the range of 0 to 65535.
341