Rip Configuration Commands; Checkzero; Default Cost (Rip View) - HP 6125G Command Reference Manual

RIP configuration commands

The term "router" in this chapter refers to both routers and Layer 3 switches.

checkzero

Syntax
checkzero
undo checkzero
View
RIP view
Default level
2: System level
Parameters
None
Description
Use checkzero to enable zero field check on RIPv1 messages.
Use undo checkzero to disable zero field check.
The zero field check function is enabled by default.
After the zero field check is enabled, the router discards RIPv1 messages in which zero fields are non-zero.
If all messages are trusty, disable this feature to reduce the processing time of the CPU.
Examples
# Disable the zero field check on RIPv1 messages for RIP process 100.
<Sysname> system-view
[Sysname] rip 100
[Sysname-rip-100] undo checkzero

default cost (RIP view)

Syntax
default cost value
undo default cost
View
RIP view
Default level
2: System level
Parameters
value: Default metric of redistributed routes, in the range of 0 to 16.
28