Ospfv3 - HP 6125G Command Reference Manual

View
OSPFv3 view
Default level
2: System level
Parameters
maximum: Maximum number of ECMP routes , in the range of 1 to 8.
Description
Use maximum load-balancing to configure the maximum number of ECMP routes.
Use undo maximum load-balancing to restore the default.
By default, the maximum number of ECMP routes is 8.
Examples
# Configure the maximum number of ECMP routes as 6.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] maximum load-balancing 6

ospfv3

Syntax
ospfv3 [ process-id ]
undo ospfv3 [ process-id ]
View
System view
Default level
2: System level
Parameters
process-id: OSPFv3 process ID, ranging from 1 to 65535. The process ID defaults to 1.
Description
Use ospfv3 to enable an OSPFv3 process and enter OSPFv3 view.
Use undo ospfv3 to disable an OSPFv3 process.
The system runs no OSPFv3 process by default.
An OSPFv3 process can run properly only when router ID is configured in OSPFv3 view. Otherwise, you
can find the process, but which cannot generate any LSA.
Related commands: router-id.
Examples
# Enable the OSPFv3 process with process ID as 120 and configure the Router ID as 1.1.1.1.
<Sysname> system-view
[Sysname] ospfv3 120
[Sysname-ospfv3-120] router-id 1.1.1.1
258