Display Ipv6 Routing-Table Protocol - HP 6125G Command Reference Manual

Default level
1: Monitor level
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string
of 1 to 31 characters. If no VPN is specified, the information of the public network is displayed.
ipv6-prefix-name: Specifies the name of the IPv6 prefix list, in the range of 1 to 19 characters.
verbose: Displays both active and inactive verbose routing information. Without this keyword, only brief
active routing information is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ipv6 routing-table ipv6-prefix to display routes permitted by the IPv6 prefix list.
Examples
# Display brief active routing information permitted by the IPv6 prefix list test2.
<Sysname> display ipv6 routing-table ipv6-prefix test2
Routes Matched by Prefix list
Summary Count : 1
Destination: 100::/64
NextHop
Interface
For command output, see

display ipv6 routing-table protocol

Syntax
display ipv6 routing-table [ vpn-instance vpn-instance-name ] protocol protocol [ inactive | verbose ] [ |
{ begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string
of 1 to 31 characters. If no VPN is specified, the information of the public network is displayed.
protocol: Displays routes of a routing protocol, which can be bgp4+, direct, ospfv3, ripng, and static.
inactive: Displays only inactive routes. Without this keyword, all active and inactive routes are displayed.
: ::
: NULL0
Table 4.
test2 :
20
Protocol : Static
Preference: 60
Cost : 0