HP 6125G Command Reference Manual page 92

Layer 3 - ip routing
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

Table 21 Command output
Field
Area areaID interface
IPAddress(InterfaceName)'s neighbors
interface
Router ID
Address
GR State
State
Mode
Priority
DR
BDR
MTU
Dead timer due in 33 sec
Neighbor is up for 02:03:35
Authentication Sequence
Neighbor state change count
# Display brief OSPF neighbor information.
Description
Neighbor information of the interface in the specified area:
areaID—Area to which the neighbor belongs.
IPAddress—Interface IP address.
InterfaceName—Interface name.
Interface attached with the neighbor.
Neighbor router ID.
Neighbor router address.
GR state.
Neighbor state:
Down—This is the initial state of a neighbor conversation.
Init—In this state, the router has seen a Hello packet from the
neighbor. However, the router has not established
bidirectional communication with the neighbor (the router
itself did not appear in the neighbor's hello packet).
Attempt—Available only in an NBMA network, Under this
state, the OSPF router has not received any information from
a neighbor for a period but can send Hello packets at a
longer interval to keep neighbor relationship.
2-Way—In this state, communication between the two routers
is bidirectional. The router itself appears in the neighbor's
Hello packet.
Exstart—The goal of this state is to decide which router is the
master, and to decide upon the initial Database Description
(DD) sequence number.
Exchange—In this state, the router is sending DD packets to
the neighbor, describing its entire link-state database.
Loading—In this state, the router sends Link State Request
packets to the neighbor, requesting more recent LSAs.
Full—In this state, the neighboring routers are fully adjacent.
Neighbor mode for LSDB synchronization.
Neighboring router priority.
The DR on the interface's network segment.
The BDR on the interface's network segment.
Interface MTU.
Dead timer times out in 33 seconds.
The neighbor has been up for 02:03:35.
Authentication sequence number.
Count of neighbor state changes.
81

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents