Display Ipv6 Routing-Table - HP 6125G Command Reference Manual

Default level
1: Monitor level
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string
of 1 to 31 characters. If no VPN is specified, the information of the public network is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ip routing-table statistics to display the route statistics of the routing table.
Examples
# Display route statistics in the routing table.
<Sysname> display ip routing-table statistics
Proto
DIRECT
STATIC
RIP
OSPF
BGP
Total
Table 3 Command output
Field
Proto
route
active
added
deleted
freed
Total

display ipv6 routing-table

Syntax
display ipv6 routing-table [ vpn-instance vpn-instance-name ] [ verbose ] [ | { begin | exclude | include }
regular-expression ]
route active
24 4
4 1
0 0
0 0
0 0
28 5
Description
Origin of the routes
Number of routes from the origin
Number of active routes from the origin
Number of routes added into the routing table since the router started up or the routing
table was last cleared
Number of routes marked as deleted, which will be freed after a period
Number of routes that got freed (got removed permanently)
Total number
added deleted
25 1
4 0
0 0
0 0
0 0
29 1
14
freed
0
0
0
0
0
0