Display Bgp Routing-Table Different-Origin-As; Display Bgp Routing-Table Flap-Info - HP 6125G Command Reference Manual

display bgp routing-table different-origin-as

Syntax
display bgp routing-table different-origin-as [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp routing-table different-origin-as to display BGP routes originating from different
autonomous systems.
Examples
# Display BGP routes originating from different ASs.
<Sysname> display bgp routing-table different-origin-as
BGP Local router ID is 2.2.2.2
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
Network
*> 55.0.0.0
*
For description of the fields,see

display bgp routing-table flap-info

Syntax
display bgp routing-table flap-info [ regular-expression as-regular-expression | [ as-path-acl
as-path-acl-number | ip-address [ { mask | mask-length } [ longer-match ] ] ] [ | { begin | exclude |
include } regular-expression ] ]
View
Any view
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? – incomplete
NextHop
12.1.1.1
14.1.1.2
Table 36.
MED LocPrf
0
0
153
PrefVal Path/Ogn
0 100?
0 300?