Preference (Ipv6 Address Family View); Reflect Between-Clients (Ipv6 Address Family View) - HP 6125G Command Reference Manual

<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] group test external
[Sysname-bgp-af-ipv6] peer test timer keepalive 0 hold 0

preference (IPv6 address family view)

Syntax
preference { external-preference internal-preference local-preference | route-policy route-policy-name }
undo preference
View
IPv6 address family view
Default level
2: System level
Parameters
external-preference: Preference of EBGP route learned from an EBGP peer, in the range of 1 to 255.
internal-preference: Preference of IBGP route learned from an IBGP peer, in the range of 1 to 255.
local-preference: Preference of IPv6 BGP local route, in the range of 1 to 255.
route-policy-name: Routing policy name, a string of 1 to 63 characters. The routing policy can set a
preference for routes passing it. The default value applies to the routes filtered out.
Description
Use preference to configure preferences for EBGP, IBGP, and local routes.
Use undo preference to restore the default.
The bigger the preference value is, the lower the preference is. The default values of external-preference,
internal-preference and local-preference are 255, 255 and 130.
Examples
# Configure preferences for EBGP, IBGP, and local routes as 20, 20 and 200.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] preference 20 20 200

reflect between-clients (IPv6 address family view)

Syntax
reflect between-clients
undo reflect between-clients
View
IPv6 address family view
327