Electronic Fund Transfer (Eft) Operation In " - " Mode - TEC MA-600-1 series Owner's Manual

2. OPERATIONS IN " - " MODE
2.2

Electronic Fund Transfer (EFT) Operation In " - " Mode

(1) Void Credit Sale
This operation is performed for canceling credit sale transactions.
OPERATION
Sales Item Entry
(|Authorization Code|) [#]
Max. 11 characters
Customer Receipt Print
(2) Void Credit Refund
This operation is performed for canceling credit refund transactions.
OPERATION
[RTN MDSE] to be continued to the top of "Void Credit Sale" sequence
NOTES:
1. Receipt post-Issue operation after finalizing a sale by the EFT is unavailable.
2. Key operation on the ECR is unavailable during the inquiry to the host.
3. Values 0 to 9 and A to Z should be used to enter the Authorization Code.
Please use the keyboard layout for the authorization code entry.
(See Section 1.3 Post Authorization Operation, Manager's Guide.)
4. In the Receipt-OFF mode, payment by the EFT media cannot be made.
5. The Validation Print operation is not possible after performing the Void Credit Sale or the Void Credit Refund
operation.
(3) Cashing Debit Refund
This operation is performed for canceling debit cashing transactions.
OPERATION
| Amount to be cashed |
Max. 7 digits
EFT terminal responds "APPROVAL".
[STORE RECEIPT]
NOTES:
1. Before performing this operation, the [DEBIT] key should be programmed with the status "no-purchase
cashing is allowed". Also each EFT Media Key should be programmed with the status "with EFT process".
Failure to do this may cause an error.
2. For the EFT function, do not perform any registration in Receipt OFF mode.
3. Receipt post-Issue operation after the Cashing Debit Refund is unavailable.
4. Key operation on the ECR is unavailable during the inquiry to the host.
5. Training Cashiers are unacceptable to the EFT terminal.
6. Store receipt must be issued to perform next transaction or read/reset jobs.
7. The Validation Print operation is not possible.
8. EFT cashing operation with the [CREDIT], [CHECK TEND], and [EBT F/S] keys is not possible.
([TXBL TL]) (|Tendered Amount|) [CREDIT]
(|Reference No.|) [#]
Max. 16 digits
[STORE RECEIPT]
[DEBIT]
Store Receipt Print
2- 2
2.2 Electronic Fund Transfer (EFT) Operation in " – " Mode
Max. 7 digits
EFT terminal responds "APPROVAL"
Store Receipt Print
Card Slide Input the Pin No. from the
Pin Pad. Then depress the
[ENTER] key.
Customer Receipt Print
EO1-11155
Card Slide