TEC MA-600-1 series Owner's Manual page 120

3. READ (X) AND RESET (Z) REPORTS
(5) Local Batch Status
A local batch status command is sent to the EFT terminal and a response from the EFT terminal is printed out.
(condition check)
Example
• Operation: Mode Lock:
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
10-20-2006 FRI #3001
BATCH STATUS
X 9999 ZZZZ9 ZZZZ9
ZZZZ9 _ZZZZZZ9.99
9999 07:38TM
A: Batch status (0 = Open, C = Closed, P = Pended, X = Incomplete): one character
B: Batch Number: 4 digits
C: Transaction count: 5 digits
D: Item count: 5 digits
E: Batch balance: 7-digit integer + 2-digit decimal
F: Forward transaction count: 5 digits
G: Forward batch balance: 7-digit integer + 2-digit decimal
NOTE:
When no response was sent from the EFT terminal within a specified time (standard: 30 seconds), a timeout
error occurs on the ECR and an error message "NO RESPONS" is shown on the LCD display.
X for read
When the ECR is being outside a sale and in X mode, depress the
[↓] key four times to select "5 EFT(BATCH)". And depress the [5] or
[Enter] key.
Depress the [↓] key to select "2 LOCAL BATCH STATUS", then
depress the [2] or [Enter] key.
A B C D
_ZZZZZZ9.99 E
F G
3-23
EO1-11155
3.2 General Notes On Report Takings