Programming Operations - TEC MA-600-1 series Owner's Manual

4. PROGRAMMING OPERATIONS

4. PROGRAMMING OPERATIONS
This chapter is provided for the store programmer or the store manager who may have to change the
programmed data of the ECR on the daily, weekly, or monthly basis. Usually, all the basic program data required
for your store should be set before delivering the product by your local TOSHIBA TEC representative. However,
in need of changing or adding program data, please refer to this chapter. It is also recommended to read the
OPERATOR'S GUIDE as well as other chapters of the MANAGER'S GUIDE in order to thoroughly understand
the descriptions in this chapter.
By turning the Mode Lock to the SET position with the MA key, the menu below is displayed on the LCD display
so that the ECR is ready to perform a programming operation.
If there are any unclear points or program data other than listed here must be changed or added, please contact
your TOSHIBA TEC representative.
CAUTION!
Do not perform programming operations which are not described in this chapter. Doing so may cause a
malfunction of the ECR.
Instructions for Programming............................................................................................................................... 4- 2
Character Entries ................................................................................................................................................ 4- 7
Time Setting or Adjustment ................................................................................................................................ 4-12
Date Setting or Adjustment................................................................................................................................. 4-13
Store Name Message Programming ................................................................................................................. 4-15
Commercial Message Programming ................................................................................................................... 4-19
Footer Message Programming ........................................................................................................................... 4-20
Cashier Name and Status Programming ............................................................................................................ 4-21
Department Table Programming ........................................................................................................................ 4-24
Department Name Programming........................................................................................................................ 4-32
Department Group Name Programming............................................................................................................. 4-33
PLU Table Programming .................................................................................................................................... 4-34
PLU Name Programming.................................................................................................................................... 4-44
Department Preset Price Setting or Changing ................................................................................................... 4-45
PLU Preset Price Setting or Changing ............................................................................................................... 4-46
Tax Table Programming ...................................................................................................................................... 4-48
%+ and %- Preset Rate Setting .......................................................................................................................... 4-58
Foreign Currency Exchange Rate Setting .......................................................................................................... 4-59
TABLE OF PROGRAMMING OPERATIONS
4- 1
EO1-11155
4. PROGRAMMING OPERATIONS
(Page)