TEC MA-600-1 series Owner's Manual page 160

4. PROGRAMMING OPERATIONS
*6: PLU Status 2
• The following shows each department status.
Status
Code
1 Price Print
2 -- vacant --
3 -- vacant --
4 Tax Symbol "F" Print
5 Canada Non-taxable Quantity
6 -- vacant --
7 -- vacant --
8 -- vacant --
NOTE:
Code 1: Price Print
When this status is set to ON (Non-print), PLU price will not be printed. However, when the Quantity
Extension transaction is performed for the PLU, its price will always be printed regardless of this
status selection. Do not set this status code ON.
Code 4: Tax Symbol "F" Print
Tax symbol "F" is printed when this code has been set "ON" to a taxable PLU. If the Food Stamp
feature has been selected, this symbol "F" will always be printed regardless of this code status when
a food stamp taxable department is entered.
In Canada, some area handles two kinds of taxes; GST and PST.
Status Code 4 (Tax Symbol "F" Print) should be set at the GST status setting.
Tax Symbol "T" ...... PST
Tax Symbol "F" ...... GST
*7: Tax Status
• Enter one- to four-digit status codes for applicable taxes. Or enter 0 to cancel the taxable status. (i.e.
Non-taxable status is set to the PLU.)
[Enter]
0: Non-taxable
1: Tax 1 (Tax 1 taxable)
2: Tax 2 (Tax 2 taxable)
3: Tax 3 (Tax 3 taxable)
4: Tax 4 (Tax 4 taxable)
*8: Whole Package Quantity (for Split Package Pricing PLUs)
• Enter a whole package quantity in a maximum of 2 digits (1 to 99). Or enter 0 to cancel the Split
Package Pricing status.
[Enter]
0 to 99
Item
(More than one code can be entered for combining Tax 1 to Tax 4
taxable statuses.
For example, enter 12 to select Tax 1 and Tax 2 taxable status.)
4-37
4.12 PLU Table Programming
Selective Status
ON (Y)
Non-print
Print
Objective Not objective
EO1-11155
OFF (N)
Print
Non-print