Training Mode Start And End; Entries In Training Mode; Operation For Training Mode End - TEC FS-1450 Owner's Manual

7.4. TRAINING MODE START AND END

When you have newly employed cashiers, you may provide some time for them to train their skills of
operating the FS-1450. You are to start and end the Training Mode. Once entering the Training Mode, a
cashier may operate just as ordinary sale entry operations. The data in the Training Mode are processed
into the training cashier memory but not affect any actual sales data in business.
Outside a sale, and in Cashier Signed-OFF condition for CASHIER CODE ENTRY
CONDITION
Method
OPERATION FOR TRAINING MODES START
Code Entry Method
Cashier Key Method
Case 1: Set the Cashier Key programmed with Training status
Case 2:
99

ENTRIES IN TRAINING MODE

Registering operation are allowed by the trainees:
• All sale or transaction entry operations are possible in the Training Mode,
except: 1) The drawer will not open.
2) The Consecutive No. on the receipt will not be incremented.
3) Validation or Endorsement print is not available.
4) Print occurs on receipt but not journal.

OPERATION FOR TRAINING MODE END

Code Entry Method, and Cashier Key Method Case 2
0 [LOG/RECEIPT] (or [LOG]) .......... A training-OFF receipt is issued in both cases.
Cashier Key Method Case 1
Change from the current Cashier Key to another Cashier Key.
Now the register is in a Signed-OFF condition. You may turn the Mode Lock to any position for its
corresponding operations. To start sale entries, a cashier's sign-ON status is again necessary.
[LOG/RECEIPT] (or [LOG]) ....... A training-ON receipt is issued.
2-digit manager-assign code of a cashier with Training status (01 to 99)
2-digit cashier's secret code (01 to 99)
[LOG/RECEIPT] (or [LOG]) ..... A training-ON receipt is issued.
Fixed to 99 for training purposes.
– 17 –
EO1-11097