And %- Preset Rate Setting - TEC MA-600-1 series Owner's Manual

4. PROGRAMMING OPERATIONS
4.17

%+ and %- Preset Rate Setting

A preset rate may be set on each of the [%+] and [%-] keys, one independent rate for each key. Once a rate is
preset, the % key will simply be depressed without a prior rate entry to activate the preset rate. If a rate is
entered prior to the depression of the key, the entered rate (manual rate) will be activated instead.
Any time outside a sale
CONDITION
OPERATION
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
NOTE: When inputting 0, the % preset rate will be canceled. If doing so, the % preset rate should be set in the
registration operation.
Main Menu
"4 RATE, LIMIT
AMOUNT" is selected.
"1 %- RATE (%-/%+)" is
selected.
Select a [%] key which
is to be programmed.
[Enter]
Input a preset rate.
[End]
4-58

4.17 %+ and %- Preset Rate Setting

ECR is being outside a sale and in SET mode.
Depress [↓] three times then [Enter].
Or Depress [4].
Depress [1] or [Enter] key.
To select [%-] key, depress [1] or [Enter].
To select [%+] key, depress [2] or depress [↓]
then [Enter].
The preset rate is entered and printed.
0.001 to 99.999 (%):
Use the [.] key if decimal portion is contained.
(See NOTE below.)
This setting is ended. A long receipt is issued
and the display returns to Main Menu screen.
EO1-11155