Other Operations Required Manager Interventions; Post Authorization Operation - TEC MA-600-1 series Owner's Manual

1. OPERATIONS IN "MGR" MODE
1.2

Other Operations Required Manager Interventions

Listing Capacity or Amount Limit Release
Amount Limits may be programmed on Departments/PLUs, Tender Medias, [DOLL DISC], [VND CPN], [STR
CPN]. These limits are programmed to check an excessively high or low amount entry by cashier's mistake at
the earliest stage. Guide your cashiers as in the following procedure:
(1) During sale entries by the cashier, an error occurs with Error Message "OPERATION ERROR"
(programmable) is displayed.
(2) The cashier clears the error by the [C] key. The cashier confirms the amount and operates the item again.
(3) If the same error occurs again, the cashier attempts to enter the amount using the [OPEN] or [LC OPEN] key.
(4) If the operation results in an error again, the Amount Limit cannot be solved by the [OPEN] or [LC OPEN] key.
(5) The cashier calls for Manager Intervention.
The procedure thereafter is the same as Steps 2) to 7) for the Items Programmed to Require Manager
Interventions (Section 1.1).
In need of information of Amount Limits, ask your TOSHIBA TEC representative.
1.3

Post Authorization Operation

This operation is used for finalizing the EFT sale transaction which was authorized on the off-line ECR.
Any time outside a sale, In a Signed-ON condition
CONDITION
OPERATION
Mode Lock: MGR
• Without Card Number Entry
[POST AUTH]
ECR wait condition
EFT terminal responds
"APPROVAL".
• With Card Number Entry
[MANUAL CARD#]
|Sale Amount| [#]
Max. 7 digits
Store Receipt Print
Card Slide |Sale Amount| [#]
NOTE 1
[STORE RECEIPT]
[POST AUTH]
(|Authorization Code|) [#]
Max. 11 characters
(Omissible)
1.2 Other Operations Required Manager Interventions
Max. 7 digits
|Card No.| [#]
Max. 25 digits
1- 3
|Authorization Code| [#]
Max. 11 characters
(Omissible)
Store Receipt Print
(|Expiration Date|) [#]
Max. 4 digits; MM/YY
(Omissible)
[STORE RECEIPT]
EO1-11155