Foreign Currency Exchange Rate Setting - TEC MA-600-1 series Owner's Manual

4. PROGRAMMING OPERATIONS
4.18

Foreign Currency Exchange Rate Setting

The rate of each foreign currency (corresponding to the [CUR1] to [CUR5] keys) are set in this operation.
By setting a rate on each Foreign Currency Key, reading the sale total and tendering in the foreign currency value
will be possible for sale finalization.
Any time outside a sale
CONDITION
OPERATION
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Main Menu
"4 RATE, LIMIT
AMOUNT" is selected.
"4 CUR EXCHANGE
RATE" is selected.
Input the rate of [CUR1]
key.
[Enter]
Input the rate of [CUR2]
key.
[Enter]
Input the rate of [CUR3]
key.
[Enter]
(A) (B)
-- continued on the next page --
4-59

4.18 Foreign Currency Exchange Rate Setting

ECR is being outside a sale and in SET mode.
Depress [↓] three times then [Enter].
Or Depress [4].
Depress [↓] three times then [Enter].
Or Depress [4].
0.000001 to 9999.999999 (%):
Use the [.] key if decimal portion is contained.
(See NOTE below.)
The exchange rate of the [CUR1] key is
entered and printed.
0.000001 to 9999.999999 (%):
Use the [.] key if decimal portion is contained.
(See NOTE below.)
The exchange rate of the [CUR2] key is
entered and printed.
0.000001 to 9999.999999 (%):
Use the [.] key if decimal portion is contained.
(See NOTE below.)
The exchange rate of the [CUR3] key is
entered and printed.
EO1-11155